Skip to product information
1 of 6

Stem Magnetic Holder

Regular price
$28.00 AUD
Regular price
Sale price
$28.00 AUD
Shipping calculated at checkout.

Elevate your bars with Stem, a minimalist holder supports your bar like a natural stem, keeping it clean, lifted, and ready to use.  Blending seamlessly into your shower space, Stem brings a touch of simplicity and elegance to your routine.

Weight Limit: Supports up to 150g / 5.29 oz bars. 

Note:  This holder is designed to work with shampoo bars, face & body bars, and all-in-one bars.  Not suitable for conditioner bars.    

 

Nhuka Stem magnetic bar holder with packaging. Made from rust-proof aluminium and stainless steel. Keeps bars dry, clean, and convenient without plastic or drilling.
Nhuka Stem magnetic bar holder shown from the side. Made from stainless steel and aluminium, it mounts with 3M tape to keep bars dry and extend their life.
Nhuka Stem magnetic bar holder shown from the side with cap. Made from stainless steel and aluminium, it mounts with 3M tape to keep bars dry and extend their life.
huka Stem magnetic bar holder in use with a round shampoo bar. Stainless steel cap embedded in the soap connects to wall-mounted base to elevate and dry the bar.
Nhuka Stem magnetic bar holder mounted on shower wall with Nhuka bars attached. Elevates bars to dry fully between uses, reducing waste.
  • Keeps bars dry

    Keeps your bar lifted, dry and within reach

  • Clean shower space

    Less mess, more space, fewer bottles

  • Made for solid bars

    For soaps, shampoo bars and One Bars

Pick your bars from a Stem

Solid bars are a better way to shower, but they need a dry place to rest. Left in a soap dish, they sit in pooled water, turn soft and messy, and break down faster than they should.

Stem showcases your beautiful bars while keeping them elevated, dry, and within easy reach. Fixed neatly to the wall, it brings a minimalist aesthetic to a calm, uncluttered shower space.

~

How to use

1

Choose a smooth surface away from the direct stream of water. Clean and dry the area with alcohol. Peel off the 3M backing, press the holder firmly into place, and leave for 24 hours before use.

2

Support the bar behind the insertion point with your fingertips, then press the cap firmly into the back. Wet the bar first to help the cap slide in smoothly and hold securely.

3

Place the bar onto the magnetic holder and let it dry between uses.

4

Enjoy your new clutter-free shower space and longer-lasting bars.

1

Choose a smooth surface away from the direct stream of water. Clean and dry the area with alcohol. Peel off the 3M backing, press the holder firmly into place, and leave for 24 hours before use.

2

Support the bar behind the insertion point with your fingertips, then press the cap firmly into the back. Wet the bar first to help the cap slide in smoothly and hold securely.

3

Place the bar onto the magnetic holder and let it dry between uses.

4

Enjoy your new clutter-free shower space and longer-lasting bars.

  • Strong magnetic hold

    Stem supports bars up to 150g

  • Longer-lasting bars

    Helps your bar dry faster and last longer

  • No-drill design

    Easy 3M tape installation. No drill or glue required.

Frequently Asked Questions

Which bars can I use it with?

Our Magnetic Holders are designed for face & body bars, shampoo bars, and One Bars.

They are not recommended for Conditioner Bars, as conditioner formulas are softer and may not hold as securely over time.

How much weight can it hold?

Stem holds bars up to 150g. Branch holds bars up to 250g.

Our largest Nhuka bars are 150g, so both holders are suitable for our shampoo bars, Face & Body Bars, and One Bars.

Where can I install it?

Install it on a smooth, clean surface such as tile, glass, or a smooth shower wall.

Avoid textured, porous, uneven, or heavily grouted surfaces, as these may prevent the holder from attaching securely.

Will it damage my shower wall?

No drilling is required. Branch uses a suction cap, while Stem uses 3M adhesive tape, so both install without screws or permanent fixtures. Any adhesive residue can usually be cleaned with alcohol after removal.

Can the holder get wet?

Yes. Our magnetic holders are designed for shower use, but we recommend installing them away from direct water flow.

This helps the holder stay secure and allows your bar to dry properly between uses.